noise

Also see audio noise.

Noise is unwanted electrical or electromagnetic energy that degrades the quality of signals and data.  Noise occurs in digital and analog systems, and can affect files and communications of all types, including text, programs, images, audio, and telemetry.

In a hard-wired circuit such as a telephone-line-based Internet hookup, external noise is picked up from appliances in the vicinity, from electrical transformers, from the atmosphere, and even from outer space.  Normally this noise is of little or no consequence.  However, during severe thunderstorms, or in locations were many electrical appliances are in use, external noise can affect communications.  In an Internet hookup it slows down the data transfer rate, because the system must adjust its speed to match conditions on the line.  In a voice telephone conversation, noise rarely sounds like anything other than a faint hissing or rushing.

Noise is a more significant problem in wireless systems than in hard-wired systems. In general, noise originating from outside the system is inversely proportional to the frequency, and directly proportional to the wavelength.  At a low frequency such as 300 kHz, atmospheric and electrical noise are much more severe than at a high frequency like 300 megahertz.  Noise generated inside wireless receivers, known as internal noise, is less dependent on frequency.   Engineers are more concerned about internal noise at high frequencies than at low frequencies, because the less external noise there is, the more significant the internal noise becomes.

Communications engineers are constantly striving to develop better ways to deal with noise.  The traditional method has been to minimize the signal bandwidth to the greatest possible extent.   The less spectrum space a signal occupies, the less noise is passed through the receiving circuitry.  However, reducing the bandwidth limits the maximum speed of the data that can be delivered.  Another, more recently developed scheme for minimizing the effects of noise is called digital signal processing (digital signal processing). Using fiber optics, a technology far less susceptible to noise, is another approach.

Last updated on: May 07, 2008

>  Enterprise Software related Research & News >  White Papers for the Retail Industry Are you a Know-IT-All? What handy input device did Douglas Englebart invent? Answer  Get the Word of the Day  Follow us on Twitter WORD OF THE DAY... SAP LEARN MORE ABOUT... SAP trends USA Contributors Worldwide Contributors Awards and Recognition Our 60+ tech-specific sites WhatIs.com RSS Feeds