vestigial sidebandVestigial sideband (VSB) is a type of amplitude modulation ( AM ) technique (sometimes called VSB-AM ) that encodes data by varying the amplitude of a single carrier frequency . Portions of one of the redundant sidebands are removed to form a vestigial sideband signal - so-called because a vestige of the sideband remains. In AM, the carrier itself does not fluctuate in amplitude. Instead, the modulating data appears in the form of signal components at frequencies slightly higher and lower than that of the carrier. These components are called sidebands . The lower sideband (LSB) appears at frequencies below the carrier frequency; the upper sideband (USB) appears at frequencies above the carrier frequency. The actual information is transmitted in the sidebands, rather than the carrier; both sidebands carry the same information. Because LSB and USB are essentially mirror images of each other, one can be discarded or used for a second channel or for diagnostic purposes. VSB transmission is similar to single-sideband (SSB) transmission, in which one of the sidebands is completely removed. In VSB transmission, however, the second sideband is not completely removed, but is filtered to remove all but the desired range of frequencies . Eight-level VSB ( 8-VSB ) was developed by Zenith for inclusion in the Advanced Television Systems Committee ( ATSC set of digital television ( DTV ) standards.
|
|
|
| Last updated on:
Nov 06, 2006 |
|
Get the 
Follow us on 
